Original Part
Alternative Part
1. LCAT1001-01 Substitution Conclusion
Based on a comparison of key technical parameters, the primary difference between the LCAT1001-01 and the original part LCAT1000-01 lies in the frequency range: the LCAT1001-01 supports only 0 Hz to 3 GHz, whereas the original part supports 0 Hz to 6 GHz. Both are identical in attenuation value (1 dB), power handling (2 W), impedance (50 Ω), and connector type (SMA In-Line Module). If your application involves high-frequency signals in the 3 GHz to 6 GHz range, the LCAT1001-01 will not meet the frequency requirement, which may result in unstable or degraded attenuation performance. However, if the operating frequency remains below 3 GHz, the LCAT1001-01 can be considered a direct substitute, with full compatibility in both electrical and mechanical characteristics.
2. LCAT1002-01 Substitution Conclusion
The technical parameters of the LCAT1002-01 are identical to those of the LCAT1001-01. Its difference from the original part LCAT1000-01 is likewise limited to the upper frequency limit (3 GHz vs. 6 GHz). The substitution feasibility of the LCAT1002-01 is the same as that of the LCAT1001-01: it is suitable only for systems operating at or below 3 GHz. Performance risks exist in applications within the high-frequency band (3–6 GHz). Within the low-frequency range, the two parts can be swapped seamlessly. However, note that the part difference may involve undisclosed secondary characteristics (such as internal construction or test standards). It is recommended to verify performance at critical frequency points before implementing the substitution in practice.
Analysis ID: 09DA-3F4A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com