Original Part
Alternative Part
1. TLC2272AQDR Substitution Conclusion
The TLC2272AQDR is not recommended as a direct substitute for the LMC6082IM/NOPB. While it offers advantages in slew rate (3.6 vs. 1.5 V/µs), gain-bandwidth product (2.25 vs. 1.3 MHz), and output drive capability (50 vs. 34 mA)—making it suitable for higher-speed applications or driving heavier loads—its input bias current (1 pA) is two orders of magnitude higher than that of the LMC6082 (0.01 pA), and its input offset voltage (300 µV) is double that of the latter. In applications involving high-impedance signal sources, precision integrators, or those requiring high DC accuracy, the TLC2272AQDR would introduce significant input error and offset, failing to maintain the original design's precision level. Its AEC-Q100 automotive-grade qualification is an additional benefit but does not compensate for the critical gap in precision parameters.
2. TLC2272AMDG4 Substitution Conclusion
Similarly, the TLC2272AMDG4 is not recommended as a direct substitute for the LMC6082IM/NOPB. Its electrical performance parameters are identical to those of the TLC2272AQDR, and it therefore shares the same fundamental differences from the original part: significantly degraded input bias current (1 pA vs. 0.01 pA) and input offset voltage (300 µV vs. 150 µV). Although it provides superior dynamic performance (slew rate, bandwidth) and output capability, these benefits do not offset the loss in critical DC accuracy and low-input-current characteristics. This variant (MDG4 suffix) is a standard industrial-grade part, aligning with the commercial/industrial-grade designation of the original, but it lacks automotive-grade certification. Substituting this device in circuits reliant on the LMC6082's ultra-low input current and high precision will result in degraded performance.
Analysis ID: B833-65BC000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com