(HKG) +86 755 8277 4696
WhatsAppWhatsApp
English
Original Part

1/1 Transceiver Half RS422, RS485 8-SOIC

Quote
Alternative Part

1/1 Transceiver Half RS422, RS485 8-SOIC

Quote

1/1 Transceiver Half RS422, RS485 8-SOIC

Quote
1. SN65HVD08D Substitution Conclusion Feasible, but specific application conditions must be evaluated. This part is compatible with the original model in terms of basic functionality and package (both are half-duplex 1/1 transceivers in 8-SOIC). The primary differences are that the SN65HVD08D does not have a clearly marked data rate (the datasheet must be consulted to confirm its actual capability; typical values for similar TI series parts are around 10Mbps, potentially lower than the original's 16Mbps). Its receiver hysteresis is higher (35mV vs. 15mV), providing stronger noise immunity. The supply voltage range is wider (3V to 5.5V vs. 3.3V), improving power supply adaptability. Substitution is viable if the actual communication rate requirement is below the device's capability and the power supply design permits it. However, if the system relies on the original part's high speed or strict single-voltage supply, timing and level matching must be verified.
2. ADM3072EYRZ-REEL7 Substitution Conclusion Only feasible in low-speed scenarios; incompatible for high-speed applications. Although this model shares the same package and protocol, its core parameters differ significantly: the data rate is only 250kbps (far below the original's 16Mbps), the receiver hysteresis is as high as 100mV (providing excellent noise immunity but potentially reducing signal sensitivity), and the supply range is narrow (3V to 3.6V). It is only suitable for low-speed, high-noise environments (e.g., industrial control) and cannot support the high-speed data transmission scenarios required by the original part. Furthermore, its narrow voltage range demands higher power supply precision. Substitution can be considered if the system's speed requirement is below 250kbps and the noise environment is severe; otherwise, performance bottlenecks will be significant.
Analysis ID: 88E7-D006000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com