Original Part
Alternative Part
1. ADM1485ARZ-REEL Substitution Conclusion
The ADM1485ARZ-REEL can serve as a direct functional and footprint replacement for the SP485EMN-L, as both are 5V-powered, pin-compatible, half-duplex RS-485/RS-422 transceivers. Key differences are as follows: the ADM1485ARZ-REEL supports a significantly higher data rate (30 Mbps) compared to the original part (10 Mbps), and its receiver hysteresis (70 mV) is substantially greater than that of the original device (20 mV). The higher data rate makes it more suitable for high-speed communication applications, while the wider hysteresis provides stronger noise immunity, reducing false triggering due to signal jitter—this is advantageous in electrically noisy environments. If the original system operates at or below 10 Mbps and is not sensitive to noise, the substitution may have no noticeable impact. However, if the original design relies on the lower hysteresis threshold, the signal threshold compatibility should be carefully evaluated.
2. ADM1485ARZ-REEL7 Substitution Conclusion
The substitution conclusion for the ADM1485ARZ-REEL7 is identical to that of the ADM1485ARZ-REEL, as both are the same device with different packaging (REEL typically refers to a standard reel, while REEL7 likely indicates a specific reel size). Compared to the SP485EMN-L, the core differences remain the data rate (30 Mbps) and receiver hysteresis (70 mV): the higher rate supports faster communication throughput, and the stronger hysteresis improves system stability in noisy environments. If the original application does not require high speed or enhanced noise immunity, the substitution can be made directly without hardware modification. However, if the original circuit was optimized for low hysteresis, signal integrity should be verified after replacement. In practice, ensure the packaging format in the supply chain meets production requirements.
Analysis ID: BBE1-D9C5000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com