Original Part
Alternative Part
1. AD706JRZ-REEL Substitution Conclusion
Direct substitution is not recommended. While its supply voltage range (4-36V) is fully compatible with the original part, and DC precision specifications such as input bias current (50 pA) and input offset voltage (30 µV) are significantly superior to the NJM8801E, the most critical performance difference lies in its extremely low gain bandwidth product (800 kHz) and slew rate (0.15V/µs). As a high-precision, low-bandwidth general-purpose op-amp, the AD706 is entirely incapable of handling the high-frequency signals required for audio applications. Substituting it will lead to severe attenuation of the circuit's high-frequency response, a drastic degradation in dynamic performance, and a failure to achieve the functionality of the original audio amplifier.
2. AD712KRZ-REEL Substitution Conclusion
Direct substitution is not recommended. The primary issues are type mismatch and supply voltage incompatibility. Firstly, the AD712 is a JFET-input op-amp featuring extremely high input impedance and very low input bias current (25 pA). Its design differs from that of a general-purpose audio amplifier, posing potential risks of incompatibility in feedback network design, DC operating point, and tonal characteristics. Secondly, its minimum operating voltage is 9V, which does not cover the original part's 4V minimum requirement, thereby limiting the applicable voltage range. Although its slew rate (20V/µs) and bandwidth (4 MHz) are higher than those of the original part, these advantages cannot overcome the fundamental type and voltage compatibility issues. A direct replacement may result in circuit malfunction or failure to meet expected performance specifications.
Analysis ID: 890F-0A2A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com