Original Part
80 Ohms @ 100 MHz 1 Power, Signal Line Ferrite Bead 0603 (1608 Metric) 300mA 300mOhm
Alternative Part
80 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 600mA 100mOhm
75 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 500mA 250mOhm
1. BBGK00160808800Y00 Substitution Conclusion
From the perspective of key electrical parameters, this part number represents a highly viable and performance-enhanced alternative. Its impedance (80Ω @ 100MHz) is identical to the Original Part. However, it offers significantly superior performance in two critical metrics: rated current (600mA vs. 300mA) and DC resistance DCR (100mΩ vs. 300mΩ). For equivalent filtering performance, it can handle higher current with lower DC voltage drop and power dissipation. A noted difference is its specified "Filter Type" as "Signal Line," whereas the Original Part is designated for "Power, Signal Line." This implies the manufacturer may not have specifically optimized or validated it for pure power path applications. When used on power lines with significant high-frequency noise or severe current fluctuations, particular attention should be paid to whether its impedance characteristic curve under high current still meets expectations.
2. BBNQ00160808750Y00 Substitution Conclusion
This part number exhibits certain parametric deviations as a substitute, and feasibility must be evaluated based on application tolerance. Its nominal impedance (75Ω @ 100MHz) is approximately 6% lower than the Original Part (80Ω), resulting in slightly reduced filtering attenuation at 100MHz. Its current capability (500mA) and DCR (250mΩ) fall between the Original Part and the BBGK part, offering better performance than the Original Part but not matching the BBGK. Similarly, its "Filter Type" is also listed as "Signal Line." If the circuit has a relaxed requirement for the precise impedance value around 100MHz (e.g., sufficient attenuation margin) and the application line current does not exceed 500mA, this part can be accepted as a substitute, providing better current handling and DCR performance compared to the Original Part.
Analysis ID: 5726-F36C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com