Original Part
Alternative Part
1. ACML-0603-101-T Substitution Conclusion
The ACML-0603-101-T represents a clear technical compromise as a substitute. The primary differences are a 20Ω reduction in nominal impedance at 100MHz (from 120Ω to 100Ω) and a 0.25mm increase in maximum height (from 0.70mm to 0.95mm). The lower impedance will degrade high-frequency noise suppression near the target frequency compared to the original part. The increased height poses a risk of mechanical interference in extremely tight or height-restricted assemblies.
While its slightly better DC resistance (DCR), lower by 50mΩ, is beneficial for reducing DC voltage drop on the signal line, its core filtering performance is not an equivalent substitute in a derating sense. This component is only suitable for applications where the original circuit has sufficient margin for the impedance value around 100MHz and where the mechanical space permits. Otherwise, filtering performance may be compromised.
2. EMI0603R-120 Substitution Conclusion
The EMI0603R-120 is a potential substitute with superior key electrical performance. Its most significant advantages are a substantially higher rated current of 400mA (double that of the original part) and a lower DC resistance (DCR) of 150mΩ. This results in lower temperature rise and higher efficiency under the same operating current, while providing greater current margin for the line. It is particularly suitable for circuits prone to current surges or intended for design upgrades.
Although its maximum height is also increased by 0.25mm (to 0.95mm), presenting similar mechanical installation considerations as the ACML part, its impedance at 100MHz (120Ω) matches the original part exactly. This ensures the core filtering characteristics remain unchanged. Provided the physical dimensions are acceptable, this is a directly compatible substitute with stronger electrical performance.
Analysis ID: 8343-19EE000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com