Alternative Part
1. 6N135020 Substitution Conclusion
Direct substitution is not recommended due to significant risk. The primary differences are as follows: Its minimum Current Transfer Ratio (CTR) is only 7% (@16mA), substantially lower than the original part's 15% minimum. Under identical input conditions, this may result in insufficient output drive capability, potentially causing unreliable circuit turn-on. Its typical turn-off time is as long as 1.3µs, significantly slower than the original's 350ns. This will severely limit system bandwidth or cause signal distortion in high-frequency switching applications. Furthermore, its maximum output voltage rating is only 20V, lower than the original's 35V, posing a risk of breakdown if the original circuit operates at higher voltages. Unless the application has extremely low tolerance requirements for CTR, switching speed, and voltage rating, substitution necessitates a re-evaluation of the circuit design.
2. 6N136-020E Substitution Conclusion
Conditional substitution is recommended; it is a more viable candidate. The differences are as follows: Its CTR range (19%-50% @16mA) offers better compatibility with the original (≥15%), and its higher minimum ensures adequate drive capability. Its switching times (200ns/600ns), although slightly slower than the original (220ns/350ns), fall within an acceptable range, having limited impact on most mid-to-low speed applications. It is crucial to note that its maximum output voltage rating (20V) is also lower than the original (35V); this is a key point that must be verified prior to substitution. If the collector-emitter voltage across the optocoupler in the original circuit consistently remains below 20V, then the 6N136-020E is a suitable functional and performance substitute.
Analysis ID: C1A8-4F18000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com