Original Part
Alternative Part
1. AD621BRZ-RL Substitution Conclusion
From the perspective of core architecture, supply voltage range, and package, the AD621BRZ-RL can serve as a pin-compatible replacement for the LT1167AIS8-1TRPBF in applications where stringent DC precision is not critical. The key differences are as follows: Its input offset voltage (50µV) is more than three times that of the original part (15µV), leading to greater output zero error when amplifying small DC signals. Its input bias current (500pA) is ten times higher than the original (50pA), meaning additional offset voltage error due to bias current will be more pronounced with high source impedance. Its bandwidth (800kHz, -3dB) is slightly lower than the original's gain bandwidth product (1MHz), resulting in a marginally narrower usable signal bandwidth at the same gain. If the application does not involve extremely high source impedance or is not sensitive to µV-level offset, this part can serve as a cost-effective alternative.
2. AD621ARZ-RL Substitution Conclusion
The AD621ARZ-RL can also function as a pin-compatible replacement for the LT1167AIS8-1TRPBF in terms of package and basic electrical characteristics, but it offers the lowest DC precision among the three parts considered. Its most critical deviation is the input offset voltage (75µV), which is five times higher than the original (15µV). This directly and significantly degrades the best achievable system DC accuracy, resulting in the largest amplified signal baseline error. Its input bias current (500pA) is also an order of magnitude larger than the original, impacting high-impedance signal sources similarly to the BRZ version. This part is only recommended for applications with very relaxed DC accuracy requirements, where the primary focus is on amplification functionality and supply range. It represents the alternative with the greatest performance compromise among the three.
Analysis ID: 0950-73D7000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com