Original Part
Alternative Part
1. AD621BRZ Substitution Conclusion
The AD621BRZ can serve as a functional substitute for the LT1167CS8-1TRPBF, albeit with a slight performance degradation in high-precision applications. Both devices share identical core architecture, package (8-SOIC), supply range (4.6V to 36V), and quiescent current (900µA), ensuring fundamental functional compatibility and direct PCB design reusability. The key differences lie in the input stage performance: the AD621BRZ exhibits an input bias current (500 pA) approximately six times higher than the LT1167 (80 pA), and an input offset voltage (50 µV) 2.5 times higher than the LT1167 (20 µV). In applications involving extremely high source impedance (e.g., photodiode interfaces) or demanding the highest DC accuracy (e.g., precision sensor conditioning), the AD621BRZ may introduce greater input error current and initial DC offset error. However, for most general-purpose instrumentation amplifier applications—such as bridge signal amplification or industrial process control—its 800 kHz bandwidth and 1.2V/µs slew rate are sufficient to match the LT1167's 1 MHz gain-bandwidth product. Furthermore, its rated 18 mA output current provides equivalent or better load drive capability. Therefore, substitution is viable, provided the impact of the increased input errors on overall system accuracy is assessed and deemed acceptable.
2. AD621BRZ-RL Substitution Conclusion
The AD621BRZ-RL is electrically and functionally identical to the AD621BRZ; thus, its substitution conclusion is the same. The "-RL" suffix denotes only a difference in packaging format (Reel), a manufacturer designation to accommodate automated pick-and-place assembly requirements. There is no distinction between the two parts in terms of silicon die, design parameters, or performance specifications. Consequently, the AD621BRZ-RL can also functionally substitute for the LT1167CS8-1TRPBF, sharing the same advantages (package, supply, drive compatibility) and technical limitations (higher input bias current and offset voltage) as detailed for the AD621BRZ. The sole consideration when choosing the AD621BRZ-RL over the AD621BRZ is whether its reel packaging is compatible with your production line's assembly equipment, as this has no bearing on electrical compatibility or performance at the board level.
Analysis ID: 0C51-9695000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com