Original Part
Alternative Part
1. ADG201AKRZ-REEL Substitution Conclusion
The ADG201AKRZ-REEL is not recommended as a direct replacement for the original DG271BDY-E3. Key differences include: a significantly higher on-resistance (90Ω vs. 50Ω), which will lead to greater signal attenuation and power dissipation; notably slower switching speeds (Ton/Toff max 300ns/250ns vs. 65ns), limiting suitability for high-frequency or fast-switching applications; larger charge injection (20pC vs. -5pC), potentially introducing higher levels of transient error; and inferior crosstalk performance (-80dB vs. -100dB), indicating lower channel-to-channel isolation. While its channel matching (ΔRon=4.5Ω) and leakage current (2nA) are acceptable, the overall degradation in critical performance parameters restricts its use to applications with low demands for speed and precision.
2. ADG201HSKRZ-REEL Substitution Conclusion
The ADG201HSKRZ-REEL is a viable substitute for the original DG271BDY-E3 in most scenarios, though certain parameter differences require attention. Its on-resistance (50Ω) matches the original part, and it offers faster switching speeds (Ton/Toff max 50ns vs. 65ns), benefiting high-speed systems. Channel matching is also superior (ΔRon=1.5Ω), improving multi-channel consistency. However, the higher charge injection (10pC vs. -5pC) may cause more noticeable voltage glitches in high-impedance analog circuits. Slightly worse crosstalk performance (-86dB vs. -100dB) could pose a challenge for high-precision multi-channel isolation. Additionally, its operating voltage range (±13.5V to ±16.5V) is narrower than the original's (±15V), so power supply compatibility must be verified. For applications insensitive to charge injection and crosstalk, this part can provide equivalent or even better performance.
Analysis ID: 3770-2676000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com