Original Part
Alternative Part
1. BR24G64FVJ-3AGTE2 Substitution Conclusion
The BR24G64FVJ-3AGTE2 is a fully compatible drop-in replacement for the original part 24FC64FT-I/MS. Both devices share identical core specifications: a 64Kbit (8Kx8) density, a 1MHz I2C interface frequency, a wide operating voltage range of 1.7V to 5.5V, a 5ms write time, and a compatible 8-TSSOP/MSOP package. In terms of electrical characteristics, communication speed, physical footprint, and functionality, the two parts are directly and seamlessly interchangeable. No modifications to existing hardware design or software drivers are required.
2. BR24G64FVJ-3GTE2 Substitution Conclusion
The BR24G64FVJ-3GTE2 can serve as a substitute for the original part in most scenarios, but with one critical limitation. The key difference is its maximum clock frequency of 400kHz, which is significantly lower than the original part's 1MHz capability. This device offers a maximum data transfer rate of only 40% compared to the original. If the original system was designed to operate above 400kHz, the substitution will result in communication failure or degraded performance. However, if the original system's I2C bus frequency is designed for 400kHz or lower, the replacement is entirely viable. Its slightly wider lower voltage limit (1.6V) is a minor advantage but is not a decisive factor in the substitution decision.
Analysis ID: 11DB-7B27000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com