Original Part
Alternative Part
1. 24AA64T-I/ST Substitution Conclusion
Direct substitution is not recommended. The 24AA64T-I/ST differs from the original part in that its clock frequency is limited to 400 kHz (versus 1 MHz for the original) and its access time is 900 ns (compared to 400 ns). This device supports a maximum I²C communication speed of only 40% of the original and responds to bus read requests more than twice as slowly. In applications requiring higher communication rates or fast data retrieval, using this device may lead to degraded system performance, tighter timing margins, or even communication failure. Therefore, substitution may only be considered in low-frequency, cost-sensitive scenarios where bus speed is not critical.
2. AT24C64D-XHM-T Substitution Conclusion
Substitution is acceptable; this is a qualified alternative. The AT24C64D-XHM-T closely matches the original part in key parameters, including 64Kbit density, 1 MHz I²C clock frequency, a wide supply voltage range of 1.7V to 5.5V, and an 8-TSSOP package. The only deviation is a slightly longer access time of 550 ns (versus 400 ns for the original). However, this difference remains well within the 1000 ns period of the 1 MHz I²C clock and generally does not affect the setup and hold timing requirements of the standard I²C protocol. Compatibility is maintained in the vast majority of applications. Functionally and performance-wise, this device is essentially equivalent to the original part.
Analysis ID: 1B68-EF53000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com