Original Part
Alternative Part
1. LCAT1002-09 Substitution Conclusion
The LCAT1002-09 differs from the original part primarily in its frequency range. Its upper operating frequency limit is 3 GHz, significantly lower than the original part's 18 GHz. In frequency bands above 3 GHz—such as C-band, Ku-band, and higher-frequency microwave applications—this attenuator may not function correctly. Potential issues include significant deviation from the nominal 9dB attenuation value, increased impedance mismatch leading to higher signal reflection, degraded system performance, and possible thermal damage due to overheating. The LCAT1002-09 can be considered a direct substitute only if the operating frequency is confirmed to be entirely within the 0–3 GHz range. It is not a viable replacement for any system operating above 3 GHz.
2. LCAT1001-09 Substitution Conclusion
The LCAT1001-09 shares identical technical specifications with the LCAT1002-09, and its substitution feasibility is therefore the same. The key difference likewise lies in its frequency range (0–3 GHz), which is substantially narrower than that of the original part (0–18 GHz). It can only cover low-frequency applications of the original part, such as basic UHF or lower-band wireless communications. For any test, communication, or radar system involving mid- to high-frequency microwave signals, this part is not a suitable substitute due to unguaranteed high-frequency performance. Selection must be strictly based on the system’s actual maximum operating frequency.
Analysis ID: 0B2B-264E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com