Original Part
Alternative Part
1. LCAT1000-07 Substitution Conclusion
The LCAT1000-07 can only serve as a limited substitute for the original part, with its core limitation being a significantly narrower frequency range (0–6 GHz) compared to the original (0–18 GHz). If your application operates below 6 GHz (e.g., standard cellular communications, Wi‑Fi, satellite C‑band, etc.), this part is directly compatible in terms of attenuation, power handling, and interfaces. However, for systems operating above 6 GHz (involving Ku‑band, radar, high‑frequency testing, etc.), using this substitute will lead to severe performance degradation—such as inaccurate attenuation and degraded VSWR—and may even damage the device. Therefore, it must not be used in any scenario exceeding 6 GHz.
2. LCAT1001-07 Substitution Conclusion
The LCAT1001-07 offers even lower substitution feasibility, with a frequency range (0–3 GHz) only one‑sixth that of the original part (0–18 GHz). It is suitable only for low‑frequency applications such as UHF and portions of the L/S bands. For any system involving mid‑to‑high frequencies (e.g., C‑band at 5–6 GHz and above) or millimeter‑wave front‑ends, this part is entirely unsuitable and will introduce substantial signal distortion and reflection. Unless it is explicitly confirmed that the system’s maximum operating frequency does not exceed 3 GHz, the LCAT1001-07 does not meet the conditions for substitution.
Analysis ID: 36E4-B42C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com