Original Part
Optoisolator Transistor with Base Output 5000Vrms 1 Channel 8-DIP
1. 6N136 Substitution Conclusion
Based on a comparison of technical parameters, direct substitution of the original 6N136-V (Everlight) with the 6N136 (onsemi) is subject to limitations, primarily dependent on application requirements. The key differences are as follows: First, the voltage isolation rating is reduced from the original 5000 Vrms to 2500 Vrms. In high‑voltage or safety‑critical applications such as industrial control or medical equipment, the 6N136 may not provide sufficient electrical isolation, increasing the risk of breakdown. Second, the switching times are slower, changing from the original 350 ns (turn‑on)/300 ns (turn‑off) to 450 ns/500 ns. In high‑speed signal processing or precision timing circuits, the 6N136 will introduce additional delay, potentially affecting system response speed and bandwidth. Other parameters such as current‑transfer ratio and input/output characteristics are essentially identical. Therefore, if the application involves only low isolation voltage (≤2500 Vrms) and is not sensitive to speed, the 6N136 can be used as a replacement, but isolation and timing design must be re‑evaluated.
2. 6N136V Substitution Conclusion
The substitution feasibility of the 6N136V (onsemi) is similar to that of the 6N136 and requires careful assessment. The differences are the same as for the 6N136: First, the voltage isolation is halved from the original 5000 Vrms to 2500 Vrms. In high‑voltage environments such as power management or communication interfaces, the reduced isolation strength may not meet safety standards or reliability requirements. Second, the switching times are extended from the original 350 ns/300 ns to 450 ns/500 ns. In fast‑switching applications such as digital isolation or pulse transmission, the signal edges will be slower, which could lead to timing errors or degraded system performance. Remaining parameters such as package and current capacity are well matched. Consequently, if the target application has relaxed requirements for isolation voltage and speed—for example, low‑speed control or non‑high‑voltage scenarios—the 6N136V can be considered as an alternative, but circuit compatibility must be verified.
Analysis ID: BE6F-83BF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com