Original Part
Optoisolator Transistor with Base Output 5000Vrms 1 Channel 8-SMD
Alternative Part
Optoisolator Transistor with Base Output 5000Vrms 1 Channel 8-SMD
1. 6N136SDVM Substitution Conclusion
The 6N136SDVM (manufactured by onsemi) can serve as a viable substitute for the original part 6N136S(TB) (manufactured by Everlight), as it shares identical key technical specifications. These include an isolation voltage of 5000Vrms, a current transfer ratio (CTR) range of 19% to 50% @ 16mA, input/output type, package (8-SMD), and maximum output current and voltage. The primary difference lies in the switching times: the 6N136SDVM features typical switching times of 250ns (turn-on) / 260ns (turn-off), which are faster than those of the original part (350ns turn-on / 300ns turn-off). This can offer improved response performance in high-speed applications. However, if the original design has strict timing requirements, verification may be necessary to ensure no system timing conflicts or compatibility issues arise. Given that all other parameters are fully matched and onsemi is a well-established manufacturer, this substitution is considered safe and reliable for most application scenarios.
2. 6N136VSMT&R Substitution Conclusion
The feasibility of substituting the original 6N136S(TB) with the 6N136VSMT&R (manufactured by Isocom) is relatively low. While its basic specifications—such as isolation voltage, CTR, package, and electrical parameters—align with the original part, a critical parameter, switching time, is not specified in the available data. This omission makes it impossible to assess its performance consistency in timing-sensitive applications. Such a discrepancy could lead to system timing instability or risk, particularly in high-speed or high-precision circuits. Additionally, the reputation and quality control of the manufacturer, Isocom, may not be on par with the original manufacturer, Everlight. Therefore, it is recommended to obtain the full datasheet and conduct practical measurement verification prior to substitution to ensure all application requirements are met.
Analysis ID: BD2A-6F8D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com