Replacement Components to BA-2RV314-A22: GPTCRM01 and GPTCRM11

Original Part

BA-2RV314-A22

Honeywell Sensing and Productivity Solutions

Switch SPDT Chassis Mount

Alternative Part

1. GPTCRM01 Substitution Conclusion The GPTCRM01 does not meet the direct replacement requirements in key electrical parameters, presents derating risks, and exhibits significant mechanical differences. Direct substitution is not recommended. Key discrepancies include: 1) Current Rating: The GPTCRM01 is rated for 15 A AC, lower than the original part’s 20 A AC. Under identical load conditions, the substitute may overheat due to overload, posing a safety hazard. Actual operating current must be re-evaluated to ensure it remains below 15 A. 2) Mechanical Characteristics: The GPTCRM01 requires an operating force of 158 gf, substantially higher than the original part’s 127 gf. Critical dimensions such as operating position and pre-travel (e.g., 29.8 mm vs. 19.1 mm) are also completely different. This indicates that greater actuation force is needed, and its lever mounting position and travel path are incompatible with the original part. Consequently, existing drive mechanisms in the equipment may fail to trigger properly or encounter installation difficulties.

2. GPTCRM11 Substitution Conclusion The GPTCRM11 shares identical parameters with the GPTCRM01; therefore, the substitution conclusion is the same: it does not satisfy direct replacement requirements, carries equivalent electrical derating risks and mechanical compatibility issues, and is likewise not recommended for direct substitution. Both parts are identical in manufacturer, description, and all listed specifications. The GPTCRM11 also has a 15 A AC current limit (presenting a derating risk relative to the original 20 A AC part) and entirely different mechanical dimensions and operating force characteristics (featuring a roller lever type, with critical dimensions such as operating position and travel significantly different from the original straight-lever part). These differences collectively prevent it from being a drop-in replacement within the physical space and electrical parameters originally designed for the BA-2RV314-A22.

Analysis ID: 9C22-3CDD000

Based on part parameters and for reference only. Not to be used for procurement or production.