Original Part
Alternative Part
1. LM1458MX Substitution Conclusion
Direct substitution is not recommended. Although the LM1458MX is package-compatible, its key parameters differ significantly from the original part. The supply voltage is single 36V (versus the original 3‑30V dual supply), which may limit power supply flexibility. The quiescent current is as high as 2.3mA per channel (compared to 700µA total for the original), leading to a substantial increase in power dissipation. The output current is only 20mA (original is 40mA), reducing drive capability by half. Moreover, it lacks AEC‑Q100 automotive qualification, failing to meet reliability requirements for automotive electronics. These discrepancies may cause the system to fall short of the original design expectations in terms of power consumption, load driving, and reliability.
2. LP2904DR Substitution Conclusion
Substitution is only advisable in low-power, low-speed applications and requires careful evaluation. The LP2904DR offers advantages in ultra-low quiescent current (54µA per channel) and low input bias current (2nA), making it suitable for battery-powered or high-precision sensing circuits. However, its slew rate (0.05V/µs) and gain bandwidth (100kHz) are considerably lower than those of the original part (0.6V/µs, 1.1MHz), severely limiting signal response speed and bandwidth. Its output current is also only 10mA (original is 40mA), resulting in weaker drive capability. Furthermore, the absence of automotive-grade certification makes it unsuitable for automotive environments. Substitution may be considered only if the application has low dynamic performance requirements and is not intended for automotive use.
Analysis ID: 65DF-5454000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com