Original Part
Alternative Part
1. LM324ADR2G Substitution Conclusion
The LM324ADR2G is compatible with the original ISL28345FBZ-T7 in package and basic functionality, but significant technical differences severely limit its viability as a drop-in replacement. Key variances include: an input offset voltage of up to 2 mV (versus 100 µV for the original), which severely degrades DC precision and can introduce substantial errors in signal processing; an input bias current of 40 nA (versus 200 pA), indicating it will introduce more noise and drift in high-impedance applications; a maximum supply voltage of 32 V (versus 40 V), making it unsuitable if the original design operates near 40 V; a slightly lower gain-bandwidth product (1 MHz vs. 1.2 MHz), affecting high-frequency response; and potentially higher quiescent current (1.5mA per channel vs. 500µA per channel), increasing system power consumption. The LM324ADR2G is only suitable for low-cost, general-purpose applications with non-critical requirements for precision, voltage, and power. It is not recommended for high-precision or high-voltage designs.
2. ADA4004-4ARZ-R7 Substitution Conclusion
The ADA4004-4ARZ-R7 offers some performance advantages over the original ISL28345FBZ-T7, but key limitations affect its direct substitution. Primary differences include: a higher gain-bandwidth product (12 MHz vs. 1.2 MHz) and faster slew rate (2.7 V/µs vs. 0.4 V/µs), making it more suitable for high-speed signal processing; and a lower input offset voltage (40 µV vs. 100 µV), providing better DC accuracy. However, its output current is only 10 mA (versus 40 mA for the original), and this limited drive capability may restrict its use in load applications. Its supply voltage range is narrower (10 V to 30 V vs. 4.5 V to 40 V), failing to cover both the lower and upper bounds of the original specification, which limits power supply flexibility. Furthermore, its input bias current of 40 nA (versus 200 pA) may introduce additional error in high-precision circuits. The ADA4004-4ARZ-R7 is suitable only for applications requiring speed and precision where the supply voltage and output current are within its specified range. It is not appropriate for high-drive or wide-voltage applications.
Analysis ID: 2E4D-5915000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com