Original Part
Alternative Part
1. OPA2251UA/2K5 Substitution Conclusion
The OPA2251UA/2K5 is essentially not a viable substitute for the AD823AARZ. Key differences include: extremely low bandwidth (gain-bandwidth product of only 35 kHz versus 10 MHz for the original), very slow slew rate (0.01 V/µs vs. 35 V/µs), and higher input bias current (20 nA vs. 1.3 pA). The OPA2251UA cannot handle high-frequency or fast-changing signals, resulting in severely inadequate dynamic response. Additionally, its higher input bias current will introduce significant errors in high-impedance sensor applications. Consequently, it is only suitable for low-frequency, power-saving circuits with minimal speed and accuracy requirements, and cannot cover the high-speed, high-precision application scenarios of the original part.
2. LT1498CS8TRPBF Substitution Conclusion
The LT1498CS8TRPBF can substitute for the AD823AARZ in certain scenarios, but critical parameters must be carefully evaluated. Differences include: lower slew rate (6 V/µs vs. 35 V/µs), higher input bias current (250 nA vs. 1.3 pA), and lower supply current (1.8 mA per channel vs. 6.3 mA). The LT1498 may be limited when processing high-speed transient signals and is not suitable for ultra-high-impedance precision measurements (e.g., photodetection). However, its bandwidth (10.5 MHz) is comparable to the original, it offers higher output current capability (30 mA), and features lower power consumption. Therefore, it can serve as a substitute in general rail-to-rail amplifier applications where signal frequencies are moderate, power sensitivity is a concern, and extremely low input bias current is not required.
Analysis ID: 3A9B-0A3C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com