Original Part
Alternative Part
1. OPA2251UA/2K5 Substitution Conclusion
Direct substitution is not recommended. The OPA2251UA/2K5 exhibits orders-of-magnitude deficiencies in key performance parameters compared to the original AD823AARZ-R7. Its extremely low gain-bandwidth product (35 kHz vs. 10 MHz) and slew rate (0.01 V/µs vs. 35 V/µs) render it incapable of processing mid-to-high frequency or fast-transient signals. It is only suitable for ultra-low frequency or DC power-saving applications and cannot meet the performance requirements of the original part's high-speed application scenarios.
2. LT1498CS8TRPBF Substitution Conclusion
This device can serve as a performance-comparable substitute in applications not involving high-impedance signal sources, but the impact of its input bias current requires careful evaluation. The LT1498CS8TRPBF offers similar dynamic performance to the AD823A in terms of bandwidth (10.5 MHz), slew rate (6 V/µs), and supply voltage range, making it suitable for most mid-to-high-speed signal processing needs. The critical distinction lies in its input stage: it features a standard BJT input with an input bias current of 250 nA, which is significantly higher than the 1.3 pA of the original JFET-input part. When interfaced with high-impedance sensors or signal sources, this will introduce substantial DC offset errors and noise. Therefore, it is not suitable for circuits requiring very high input impedance, such as photodetection or high-precision integrating applications.
Analysis ID: 8F6A-BE19000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com