Original Part
Alternative Part
1. TL072CD Substitution Conclusion
The TL072CD can serve as a replacement for the original part in most general-purpose audio and signal conditioning circuits, with one critical limitation: its supply voltage range (±5V to ±15V) is significantly narrower than that of the original TL082CMX (up to ±18V). If the original circuit operates at voltages exceeding ±15V, the TL072CD is not suitable.
When used within its allowable supply range, the substitution yields the following differences: the TL072CD exhibits lower quiescent current (1.4mA vs. 3.6mA per channel), slightly higher bandwidth (5.25MHz vs. 4MHz), and marginally better input offset voltage (3mV vs. 5mV). This results in lower system power consumption and slightly superior AC performance and precision. However, its drive capability (output current) may be somewhat insufficient; therefore, the load conditions must be verified.
2. TL082BCD Substitution Conclusion
As the "B"-grade version of the TL082, the TL082BCD represents a comprehensive optimization and tightening of electrical parameters compared to the original TL082CMX. However, its substitution is similarly constrained by a narrower supply voltage range (±5V to ±15V).
Key differences include significantly lower input bias current (30pA vs. 50pA), improved input offset voltage (2mV vs. 5mV), and lower quiescent current (1.4mA vs. 3.6mA per channel). This device offers higher DC precision and lower power consumption. Its gain-bandwidth product (3MHz) is slightly lower than the original's (4MHz), and its output current (10mA) is also lower. Performance may degrade slightly in applications requiring higher bandwidth or driving heavier capacitive/low-impedance loads.
Within its applicable voltage range, the TL082BCD is a preferred substitute for scenarios prioritizing high precision and low power consumption.
Analysis ID: 7B9D-B547000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com