Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
1. 2305-1HDCG8 Substitution Conclusion
From the perspective of core functionality, electrical parameters, and package, the 2305-1HDCG8 can serve as a direct replacement for the PL123-05SC-R, pending verification of signal level compatibility. Both are PLL-based 1:5 clock buffers with fully matched specifications for maximum frequency (133MHz vs. 134MHz), supply voltage range (3.0V to 3.6V), and package (8-SOIC). The key difference lies in the defined logic standards: the original part does not explicitly specify its input/output logic, whereas the substitute explicitly defines LVTTL inputs and CMOS/LVCMOS/TTL outputs. Under a 3.3V supply, the substitute's input high-level threshold (typically 2.0V) may be higher than that of the original part (which may be VCC/2 or lower), while its output logic standard offers broader compatibility. Substitution is viable if the original design's input signals meet LVTTL specifications; otherwise, there is a risk of input non-recognition. It is recommended to perform level and timing verification prior to board-level implementation.
2. 2305A-1HDCGI Substitution Conclusion
The 2305A-1HDCGI is identical to the 2305-1HDCG8 in all key parameters and functionality. Therefore, its feasibility as a replacement for the PL123-05SC-R leads to the exact same conclusion. The only distinctions between the two parts are typically found in the suffix ("A" and "I"), which usually denote product revision (e.g., "A" may indicate performance enhancements or process changes) or ordering code variations for packaging/temperature range (e.g., "I" likely signifies an industrial temperature grade). These suffixes do not indicate any difference in the provided core technical specifications. When evaluating direct substitution, the 2305A-1HDCGI presents the same signal level compatibility considerations as the 2305-1HDCG8. Confirming logic level interface matching within the target system remains a prerequisite for application.
Analysis ID: 978D-21B2000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com