Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
1. 2305-1HDCGI8 Substitution Conclusion
From a core parameter perspective, the 2305-1HDCGI8, as a zero-delay buffer, is fully consistent with the original part PL123S-05SC-R in terms of input/output count (1:5), integrated PLL with bypass, operating voltage (3.0V to 3.6V), and package (8-SOIC). This indicates high pin compatibility and potential for basic functional substitution. The key difference lies in the signal interface specification: the original part is generically labeled for "Clock," whereas the 2305-1HDCGI8 explicitly defines its input as LVTTL and its outputs as CMOS/LVCMOS/TTL. The I/O logic levels of the substitute part are explicit and fixed. Prior to substitution, it is critical to verify that the clock signal levels in the original design match these specifications; otherwise, logic level incompatibility may occur. Furthermore, the 1MHz difference in maximum frequency (133MHz vs. 134MHz) is typically negligible in practical applications. However, validation is recommended if the system operates at its frequency limit.
2. 2305A-1DCG8 Substitution Conclusion
The feasibility conclusion for substituting with the 2305A-1DCG8 is highly similar and equally viable as for the 2305-1HDCGI8, as their key parameter descriptions are identical. Both serve as zero-delay buffers with the same interface (LVTTL input, CMOS/LVCMOS/TTL output), frequency, voltage, and package. Their core points of divergence from the original PL123S-05SC-R are also the same: namely, the explicit, fixed-level interface replaces the original generic clock description. The 2305A-1DCG8 similarly requires the system clock levels to conform to its defined specifications for reliable operation. The "A" version typically denotes an improved or derivative variant of the original part, potentially offering minor enhancements in internal circuit optimization, power consumption, or specific parameters. These do not, however, impact the core comparison for substitution purposes against the original target. Once level compatibility and pinout definitions (which must be verified against the detailed datasheet) are confirmed, it can serve as a functionally equivalent drop-in replacement.
Analysis ID: 99D6-A821000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com