Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
1. 2305-1HDCG8 Substitution Conclusion
The 2305-1HDCG8 can serve as a functional replacement for the original PL123S-05SC-R, with the following technical deviations noted: its maximum frequency is 133MHz (slightly lower than the original's 134MHz), the input level is explicitly specified as LVTTL (the original only labeled "Clock"), and the output supports multiple standards (CMOS/LVCMOS/TTL, unspecified in the original). The frequency difference may pose a marginal risk in applications strictly dependent on 134MHz. The clarified input/output levels improve compatibility but require verification of signal matching with the original system. All other key parameters (PLL with bypass, 1:5 ratio, supply voltage, package) are identical, making the parts interchangeable in most mid-to-low speed clock distribution scenarios.
2. 2305A-1HDCGI Substitution Conclusion
The 2305A-1HDCGI shares identical electrical parameters with the 2305-1HDCG8; therefore, the substitution conclusion is the same: it can functionally replace the original part. The only distinction lies in the suffix of the part number, which may relate to production lot, temperature range, or process revision, but no difference is reflected in the provided key specifications. Similarly, attention must be paid to the 133MHz frequency limit and the compatibility of the LVTTL input/multi-standard output interface. Substitution is feasible if the original design has sufficient margin and the electrical characteristics of the signals are compatible. It is recommended to perform bench verification of timing and signal integrity prior to replacement, particularly in high-frequency or demanding environments.
Analysis ID: C215-7FDE000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com