Original Part
Alternative Part
1. LMC6082AIMX/NOPB Substitution Conclusion
This device is recommended as a direct replacement, offering comprehensive performance improvements over the original part. While maintaining the same package and supply voltage range (4.5V to 15.5V), the LMC6082 delivers significant enhancements in key specifications. Its gain-bandwidth product (1.3 MHz vs. 350 kHz) and slew rate (1.5 V/µs vs. 0.11 V/µs) are substantially higher, providing superior signal processing speed and usable bandwidth. Furthermore, lower input bias current (0.01 pA) and input offset voltage (150 µV) contribute to improved DC accuracy. The most critical upgrade is its specified rail-to-rail output, resolving the potential output swing limitation of the original part. The primary trade-off is its quiescent current of 1.1 mA per channel, approximately 12 times that of the original (86 µA per channel). This must be evaluated in power-sensitive applications for its impact on supply capability and thermal dissipation.
2. ICL7621DCSA+ Substitution Conclusion
Substitution with this device requires extreme caution and is only viable for specific applications. Although it offers a higher gain-bandwidth product (1.4 MHz) and slew rate (1.6 V/µs) compared to the original, along with rail-to-rail output and a wider supply range (2V to 16V), it has a critical weakness. Its input offset voltage is specified at 15 mV, which is over an order of magnitude worse than the original (1 mV) and the LMC6082 (150 µV). This can introduce unacceptable systematic error in circuits amplifying small DC signals or requiring high-precision closed-loop operation. Its input bias current (1 pA) is also higher than the original (0.04 pA). This substitute should only be considered for AC-coupled or switching applications where DC precision is non-critical, but wide supply voltage and rail-to-rail output are required.
Analysis ID: 6658-9AF0000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com