Original Part
Alternative Part
1. FMAT7466-6 Substitution Conclusion
The FMAT7466-6 can serve as a conditional, verification-required substitute. It matches the original AT-106V part in all key specifications: attenuation value (6dB), power handling capacity (2W), impedance (50Ω), and connector interface (SMA In-Line Module). However, its frequency range (0-12 GHz) is narrower than the original's 0-18 GHz. Therefore, if your application operates below 12 GHz, the FMAT7466-6 can be considered a direct drop-in replacement. If the system frequency coverage or required testing extends into the 12-18 GHz range, the FMAT7466-6 will not meet performance specifications. This could lead to degraded attenuation accuracy and worsened VSWR, ultimately impacting overall system performance. It is essential to verify the application's maximum operating frequency prior to substitution.
2. SA6-06 Substitution Conclusion
The SA6-06 has low substitution feasibility and is generally not recommended for direct replacement. While its basic parameters—attenuation, power rating, impedance, and interface—match the original AT-106V, its frequency range (0-6 GHz) is significantly reduced compared to the original's 0-18 GHz. This critical limitation means the SA6-06 is only guaranteed to meet specifications within 6 GHz. For any application where operation, testing, or harmonic content may involve frequencies above 6 GHz, using the SA6-06 introduces substantial performance uncertainty and risk. Potential issues include excessive attenuation at higher frequencies, signal reflection due to impedance mismatch, and potential device damage. Consequently, it is only suitable for applications with an extremely low frequency ceiling requirement (≤6 GHz).
Analysis ID: 3870-8971000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com