Original Part
Alternative Part
1. TL074BCD Substitution Conclusion
The TL074BCD can directly replace the original TL074ID, as both are J-FET input operational amplifiers from the same TI series. Key parameters such as bandwidth, slew rate, quiescent current, and supply range are identical. The primary difference lies in the input offset voltage—2 mV for the TL074BCD versus 3 mV for the TL074ID—giving the TL074BCD slightly better DC accuracy. With full pin compatibility and highly consistent electrical characteristics, the TL074BCD can serve as a drop‑in replacement in the vast majority of applications.
2. LM224DR2G Substitution Conclusion
The LM224DR2G is not suitable for direct substitution of the TL074ID, as it is a general‑purpose bipolar op‑amp with fundamentally different characteristics. Key differences include input bias current (90 nA for the LM224DR2G compared to 65 pA for the TL074ID), gain‑bandwidth product (1 MHz vs. 5.25 MHz), and unspecified slew rate—typically much lower than that of J‑FET types. The LM224DR2G exhibits significantly lower input impedance and inferior high‑frequency performance, making it unsuitable for high‑impedance signal sources or applications requiring higher speed. Although it offers a wider supply range (3 V to 32 V), it should only be considered for low‑speed, general‑purpose circuits where input error and frequency response are not critical.
Analysis ID: 81D1-35EA000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com