Original Part
Alternative Part
1. ISL4485EIBZ Substitution Conclusion
The ISL4485EIBZ is fully compatible with the original SN65LBC176AD in terms of protocol (RS422/RS485), duplex mode (half-duplex), number of drivers/receivers (1/1), and package (8-SOIC). However, there are two key technical differences: lower data rate (20 Mbps vs. 30 Mbps) and higher receiver hysteresis (70 mV vs. 50 mV). The reduced data rate means the ISL4485EIBZ cannot support the original part’s maximum 30 Mbps communication speed, potentially making it unsuitable for high-speed data transmission applications. On the other hand, the higher hysteresis provides improved noise immunity, enhancing signal stability in noisy environments, though it may slightly reduce receiver sensitivity. Additionally, its wider supply voltage range (4.5V–5.5V vs. 4.75V–5.25V) offers greater power supply flexibility. If the application’s data rate requirement does not exceed 20 Mbps and better noise margin is needed, the ISL4485EIBZ is a viable substitute; otherwise, it is not a replacement for applications that must maintain 30 Mbps high-speed performance.
2. LTC1481IS8TRPBF Substitution Conclusion
The LTC1481IS8TRPBF matches the original SN65LBC176AD in protocol (RS422/RS485), duplex mode (half-duplex), driver/receiver count (1/1), and package (8-SOIC). The differences lie in a significantly lower data rate (2.5 Mbps vs. 30 Mbps) and slightly lower receiver hysteresis (45 mV vs. 50 mV). The substantial drop in data rate limits the LTC1481IS8TRPBF to low-speed communication applications; it cannot meet the 30 Mbps high-speed data transmission requirement of the original part. The marginally reduced hysteresis may slightly degrade noise margin, potentially affecting signal integrity in high-noise environments, though the difference is small. The supply voltage range is identical (4.75V–5.25V), offering no additional advantage. The LTC1481IS8TRPBF can only be considered as a substitute if the application’s data rate does not exceed 2.5 Mbps and the operating environment is not noise-sensitive. It is not suitable for any scenario requiring medium- to high-speed performance.
Analysis ID: A0E8-B999000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com