Original Part
Alternative Part
1. LTC1483IS8TRPBF Substitution Conclusion
Direct substitution is not recommended. The LTC1483IS8TRPBF has a maximum data rate of only 250 kbps, which is significantly lower than the 30 Mbps of the original SN65LBC176AD. This makes it unable to meet timing requirements for signal transmission in high-speed communication scenarios. Furthermore, its receiver hysteresis (45 mV) is slightly lower than that of the original part (50 mV), which may result in marginally weaker noise margin and increase the risk of bit errors in electrically noisy environments. Although both devices are compatible in terms of supply voltage, package, and half-duplex operation, the fundamental speed difference dictates that the LTC1483 is only suitable for low-speed systems or applications where timing is not critical, and cannot cover the high-speed use cases of the original part.
2. LTC1481CS8TRPBF Substitution Conclusion
Substitution is feasible under specific conditions, but system speed requirements must be evaluated. The LTC1481CS8TRPBF offers a data rate of 2.5 Mbps, which is higher than the LTC1483 but still substantially lower than the original part’s 30 Mbps. It cannot be used in high-speed data exchange applications such as industrial high-speed buses or high-frequency sensor networks. Its receiver hysteresis (45 mV) is also slightly lower, which may modestly reduce noise immunity. If the actual data rate in the application is below 2.5 Mbps and the environmental noise is well-controlled, this device can serve as a replacement based on its compatible voltage, package, and functionality. Otherwise, a part with matching speed performance should be prioritized.
Analysis ID: 96F2-764F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com