Original Part
Alternative Part
1. M24C64-RDW6TP Substitution Conclusion
The M24C64-RDW6TP can serve as a viable substitute for the 24AA64-E/ST in most applications, but several key differences must be noted. Its clock frequency is increased to 1 MHz (compared to the original 400 kHz), and its access time is reduced to 450 ns (from the original 900 ns), which significantly enhances data transfer rates and read performance, making it suitable for high-speed applications. Its operating voltage range is 1.8V to 5.5V (versus the original 1.7V to 5.5V), with a slightly higher minimum voltage; this may cause compatibility issues in systems strictly dependent on 1.7V operation. Other parameters, such as memory capacity, interface, write cycle time, and package, remain identical. Therefore, when substituting, it is necessary to verify whether the system voltage and host controller can support the higher I2C frequency.
2. BR24S64FV-WE2 Substitution Conclusion
The BR24S64FV-WE2 is a highly feasible substitute for the 24AA64-E/ST, as its primary technical parameters are essentially consistent. The clock frequency (400 kHz), write cycle time (5 ms), and operating voltage range (1.7V to 5.5V) are all identical, ensuring electrical compatibility and performance matching. The main difference lies in the package: it uses an 8-LSSOP (versus the original 8-TSSOP). Although the width is the same (4.40 mm), the LSSOP may have slight variations in profile height or pin pitch, requiring verification of mechanical compatibility in PCB layout and assembly processes. Additionally, its access time is not explicitly specified in the parameters; while it is assumed to be similar to the original part, the datasheet should be reviewed during design to avoid potential timing risks. Overall, the substitution is straightforward, with only the package details requiring attention.
Analysis ID: 310B-BD94000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com