Original Part
Alternative Part
1. TL072ACDRG4 Substitution Conclusion
The TL072ACDRG4 can directly replace the AD712TRZ-EP in terms of package and channel count. However, significant differences in key parameters limit its feasibility as a substitute, restricting its use to applications where high DC precision is not critical. The most critical discrepancy is its input offset voltage of 3mV (compared to 300µV for the AD712). In applications requiring high DC accuracy and low error, such as signal conditioning or sensor amplification, the TL072 may introduce systematic errors that are difficult to calibrate. Furthermore, its higher input bias current (65 pA) makes it unsuitable for very high-impedance signal sources. While it offers slight advantages in bandwidth and power consumption, these do not compensate for its shortcomings in DC performance.
2. ISL28110FBZ-T7A Substitution Conclusion
The ISL28110FBZ-T7A matches or exceeds most performance parameters of the original part, but its substitution feasibility is fundamentally limited by channel count, preventing a direct drop-in replacement. The core difference is that it is a single-channel op-amp, whereas the AD712 is dual-channel. Implementing equivalent functionality requires modifying the PCB layout and using two ICs. If this condition is acceptable, the ISL28110 offers distinct advantages: it maintains a low 300µV offset voltage and an extremely low 2pA input bias current. Additionally, it provides higher bandwidth (12.5 MHz), stronger output drive capability (50mA), and a wider supply voltage range (up to 40V). Its rail-to-rail output characteristic also enables a greater dynamic range in low-voltage, single-supply applications.
Analysis ID: 15CD-9C58000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com