Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
1. 2305B-1HDCG Substitution Conclusion
The substitution is considered generally feasible, with a key note on input level compatibility. The primary difference is as follows: the Renesas 2305B-1HDCG features LVTTL inputs (typical threshold ~1.2V), whereas the original Diodes PI6C2405A-1HWIE utilizes TTL inputs (typical threshold ~1.5V). The substitute part imposes a less stringent minimum requirement for input high-level voltage, ensuring direct compatibility in most systems driven by 3.3V logic levels. However, a potential risk exists if the input signal's high-level voltage falls within the marginal range of 1.3V to 1.5V. On the other hand, its output supports CMOS/LVCMOS/TTL, offering broader load-driving capability compared to the original part's TTL-only output, which is an advantage. Furthermore, its PLL supports a bypass mode, increasing application flexibility.
2. 2305-1HDCG8 Substitution Conclusion
The substitution is deemed feasible, with no substantive difference in electrical parameters compared to the 2305B-1HDCG. According to the provided specifications, the 2305-1HDCG8 is identical to the 2305B-1HDCG in all key parameters (input, output, frequency, voltage, PLL functionality, etc.). The suffix variation between "1HDCG" and "1HDCG8" typically denotes differences only in reel packaging, tape format, or manufacturing lot, with no impact on the device's electrical performance or functionality. The feasibility analysis for substitution is identical to that for the 2305B-1HDCG: it can serve as a directly compatible and more flexible alternative, provided the front-end input signal meets LVTTL levels.
Analysis ID: BD6E-4B8D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com