Original Part
Alternative Part
1. ADM483EARZ-REEL Substitution Conclusion
A comparison of key parameters reveals that the ADM483EARZ-REEL and the original part, LTC2862MPS8-2TRPBF, are identical in package, protocol, data rate, and number of drivers/receivers. However, two significant differences exist: its supply range is limited to 4.5V to 5.5V (compared to the original's 3V to 5.5V), and its receiver hysteresis is only 70mV (versus 150mV for the original). If the original system operates at 3.3V, the ADM483 will not be directly compatible. Furthermore, its lower noise margin—smaller hysteresis voltage directly correlates with weaker noise immunity—may lead to false triggering in electrically noisy environments. Therefore, this substitute is only suitable for pure 5V supply systems with minimal noise interference. Careful evaluation of system conditions is required before substitution.
2. ISL8485ECBZ Substitution Conclusion
The ISL8485ECBZ matches the original part in package, protocol, and number of drivers/receivers. However, three core differences are present: its data rate capability is significantly higher at 10Mbps (versus 250kbps for the original), its supply range is limited to 4.5V to 5.5V, and its receiver hysteresis is 70mV (compared to the original's 150mV). While the ISL8485 offers higher communication bandwidth, it similarly cannot support 3.3V supply systems. Its low hysteresis characteristic also results in inferior noise rejection compared to the original part. For an original low-speed application operating in a 5V environment, functional substitution is possible. However, attention must be paid to potential signal integrity issues introduced by the higher-speed capability, and the degraded noise immunity may impact overall reliability.
Analysis ID: 9B9F-2D7E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com