Original Part
Alternative Part
1. Substitution Conclusion for 24LC64FT-I/ST
The 24LC64FT-I/ST matches the original part in core parameters such as memory capacity, interface, and timing. However, two key differences exist: First, its supply voltage range is 2.5V–5.5V, which is higher than the original’s 1.7V–5.5V. This prevents direct substitution in low‑voltage systems operating below 2.5V, potentially limiting its use in battery‑powered or low‑voltage applications. Second, the package is an 8‑TSSOP. While its mechanical dimensions are identical to the original 8‑LSSOP, the lead form differs slightly, requiring verification of PCB pad compatibility. If the system voltage always exceeds 2.5V and the package can be adapted, this device can serve as a functional replacement; otherwise, it is not suitable.
2. Substitution Conclusion for AT24C64D‑XHM‑T
The AT24C64D‑XHM‑T is a superior alternative. It maintains the same wide supply voltage range of 1.7V–5.5V as the original, while offering improved performance: the I²C clock frequency is increased to 1MHz (versus the original 400kHz), and access time is reduced to 550ns. This provides stronger performance in high‑speed communication scenarios while remaining backward‑compatible with lower‑speed modes. The package is also an 8‑TSSOP, so pin‑compatibility should be verified. However, its electrical characteristics fully cover the original requirements. In the absence of specific timing dependencies, it can be directly substituted and may enhance overall system performance.
Analysis ID: FDF6-D80A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com