Original Part
Optoisolator Transistor Output 5300Vrms 2 Channel 8-DIP
Alternative Part
1. HCPL-4534-020E Substitution Conclusion
Overall, the HCPL-4534-020E can serve as a conditional substitute for the SFH6326-X001. The key differences are as follows: its isolation voltage (5000Vrms vs. 5300Vrms) is slightly lower but comparable—system margin must be verified; the output withstand voltage (20V vs. 25V) is also lower, requiring confirmation that the load voltage does not exceed 20V; and the forward voltage (1.5V vs. 1.33V) is somewhat higher, which may lead to a marginal increase in input-side drive power consumption. Its advantages include a well-defined CTR range (15%–50%) and switching speeds comparable to the original part (200ns/600ns). Substitution is feasible if the application provides sufficient margin for isolation and output voltage requirements, and if the input drive can accommodate the slightly higher VF.
2. HCPL-2533 Substitution Conclusion
The HCPL-2533 is not suitable for directly replacing the SFH6326-X001 due to significant deviations in key parameters. Major differences include: a substantially lower isolation voltage (3750Vrms vs. 5300Vrms), which may compromise high-voltage isolation reliability; an output withstand voltage of only 7V (vs. 25V), greatly limiting the load-side voltage range; noticeably slower switching speeds (800ns/1µs vs. 200ns/500ns), impacting high-frequency signal transmission; and differing CTR test conditions (based on 8mA vs. 16mA), making direct comparison less meaningful. This device is only appropriate for low-voltage, low-speed applications and cannot meet the design boundaries of the original part.
Analysis ID: 59F3-D5F1000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com