Original Part
Alternative Part
80 Ohms @ 100 MHz 1 Ferrite Bead 0603 (1608 Metric) 600mA 100mOhm
70 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 600mA 100mOhm
1. WLBD1608K2U800TP Substitution Conclusion
From an electrical and mechanical specification perspective, the WLBD1608K2U800TP possesses the fundamental hardware basis for direct substitution. Its package dimensions, rated current (600mA), and maximum DC resistance (100mOhm) are identical to the original component. The core difference lies in its impedance of 80 ohms at 100MHz, which is higher than the original part's 68 ohms. At the same 100MHz noise frequency, this device will provide greater attenuation. However, it may also slightly alter the frequency response characteristics of the filter. If the original circuit design is not critically sensitive to the 68-ohm impedance value (e.g., it is not used in a precisely matched RF or specific damping circuit) and can tolerate a marginally enhanced filtering effect at the target frequency, then this part number is a viable alternative. It is, however, recommended to perform actual circuit noise testing post-substitution to verify performance.
2. BBGK00160808700Y00 Substitution Conclusion
The BBGK00160808700Y00 offers an excellent direct substitution candidate, with perfect alignment to the original part in key hardware parameters such as package, current rating, and DC resistance. Two minor differences exist: first, its impedance at 100MHz is 70 ohms, only 2 ohms higher than the original—a negligible deviation with minimal impact on filtering performance. Second, it is explicitly designated as a "Signal Line" type. Its impedance-frequency profile is likely optimized for signal integrity; compared to a general-purpose ferrite bead, it may offer better control over edge smearing or distortion in high-speed signals while providing noise suppression. This part is not only nearly equivalent in electrical parameters, but its signal-line-specific characteristics may also deliver more reliable performance in applications like high-frequency digital lines. It represents a high-quality alternative with very low risk and potential for added benefit.
Analysis ID: A38C-F235000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com