Original Part
Alternative Part
Standard (General Purpose) Amplifier 1 Circuit Rail-to-Rail SC-88A (SC-70-5/SOT-353)
1. TSV631ICT Substitution Conclusion
The TSV631ICT is compatible with the original OPA313IDCKT in terms of package, supply voltage range, and rail-to-rail output characteristics. However, there are notable deviations in its key parameters: the input offset voltage is as high as 3 mV (compared to 500 µV for the OPA313), which directly compromises DC accuracy and makes it unsuitable for high-precision applications such as sensor signal conditioning. The gain bandwidth product (880 kHz) and slew rate (0.34 V/µs) are slightly lower, potentially degrading high-frequency response and transient performance. Additionally, the input bias current (1 pA) and quiescent current (60 µA) are marginally higher, which may have a minor impact on low-power designs. The TSV631ICT is only recommended for low-frequency applications where precision is not critical and cost or wide supply voltage (down to 1.5 V) is prioritized. Substitution should be carefully evaluated against the system’s error tolerance.
2. NCS20081SQ3T2G Substitution Conclusion
The NCS20081SQ3T2G closely matches the OPA313IDCKT in key specifications such as package, supply range, and input offset voltage (500 µV). It also offers a slightly better gain bandwidth product (1.2 MHz). However, note that its slew rate (0.4 V/µs) is somewhat lower, which may limit large-signal high-frequency response. The output current capability (15 mA) is significantly lower than that of the OPA313 (typical values in the tens of mA, though not explicitly specified), potentially restricting performance when driving low-impedance loads. The input bias current (1 pA) is slightly higher but generally negligible in most applications. Overall, this device can serve as a drop-in replacement in many general-purpose scenarios, particularly where precision and bandwidth are important, but load driving capability and transient response should be verified against system requirements.
Analysis ID: F647-11B0000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com