Original Part
Alternative Part
1. LM358D Substitution Conclusion
The LM358D can serve as a viable substitute for the AS358MTR-E1 in applications where the supply voltage does not exceed 30V and stringent input offset voltage requirements are not critical. The key differences are as follows: The LM358D features a typical input offset voltage of 3mV, which is slightly higher than the AS358's 2mV. This may introduce marginally greater error in applications demanding high-precision DC amplification. Its maximum supply voltage rating is 30V, lower than the AS358's 36V. Consequently, the LM358D is unsuitable if the original circuit operates at or above 30V. However, its supply current is 500µA per channel, significantly lower than the AS358's 700µA per channel, resulting in lower quiescent power dissipation. Furthermore, the LM358D specifies a slew rate of 0.3V/µs and a gain-bandwidth product (GBWP) of 700kHz. Since these dynamic parameters are not specified for the AS358, it is necessary to verify that the original design has sufficient margin for dynamic performance.
2. LM258D Substitution Conclusion
The LM258D is a potential substitute for the AS358MTR-E1 in applications where the supply voltage remains within 32V and input offset voltage is not a critical parameter. The differences are similar to those of the LM358D: its input offset voltage is 3mV (slightly higher), and its maximum supply voltage is 32V, which remains lower than the AS358's 36V and is the primary limiting factor. Its supply current is also 500µA per channel, offering lower power consumption. A notable performance advantage is the LM258D's gain-bandwidth product of 1.1MHz, which is higher than that of the LM358D. This enables a wider signal bandwidth for a given gain, making it more favorable for applications with slightly higher dynamic response requirements. Nevertheless, the primary verification must ensure that the original system's operating voltage is within the LM258D's 32V upper limit.
Analysis ID: DD2E-04CC000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com