Original Part
Shunt Voltage Reference IC Adjustable 2.5V 36 VV ±1% 100 mA SOT-23-3
Alternative Part
1. LM431SBCM32X Substitution Conclusion
The LM431SBCMBCM32X can functionally and mechanically replace the AS431IBNTR-G1, but two key parameter differences must be noted and their impact on the application assessed. First, its typical cathode operating current (`I_cathode`) is 1mA, significantly higher than the original part's 50µA. Upon substitution, the external biasing resistors (notably the pull-up resistor R1) must be recalculated and adjusted to ensure proper device startup and stable operation. Failure to do so may prevent the circuit from establishing the reference voltage. Second, it specifies a typical temperature coefficient (`Temp Coeff`) of 50ppm/°C, a parameter not provided for the original part. This is a clear and generally beneficial addition for designs sensitive to temperature drift, improving output voltage stability over a wide temperature range. Substitution is feasible, but it is not a direct "drop-in" replacement. Recalculation and validation of circuit parameters are mandatory.
2. LM431SCCM32X Substitution Conclusion
Building upon the LM431SBCM32X, the LM431SCCM32X further improves the output voltage `Tolerance` from ±1% to ±0.5%. This provides higher initial accuracy as a voltage reference, making it suitable for applications with stricter voltage precision requirements. Compared to the original AS431IBNTR-G1, it shares the same differences: a higher cathode operating current requirement (1mA vs. 50µA) and a specified temperature coefficient (50ppm/°C). The substitution feasibility conclusion is similar to that for the LM431SBCM32X: electrically and mechanically compatible, but the peripheral biasing circuit must be redesigned to accommodate the higher cathode current. Furthermore, its higher accuracy grade represents a performance upgrade over the original part, typically offering superior performance, though potentially at a slightly higher cost.
Analysis ID: 688D-0BAB000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com