Original Part
Alternative Part
1. TL431ILPRPG Substitution Conclusion
Direct substitution is not recommended. The core issue with the TL431ILPRPG (onsemi) lies in its significantly inferior initial accuracy (±2.2%) and typical temperature coefficient (50ppm/°C) compared to the original AZ431AZ-ATRE1 (±0.4%, 20ppm/°C). Over a wide temperature range, the output voltage deviation of the TL431ILPRPG may be substantially larger, potentially introducing unacceptable errors in temperature-sensitive systems, such as precision measurement or high-stability power supplies. Although both are adjustable shunt references with identical voltage ranges and cathode current specifications, the differences in these key performance parameters restrict its use to applications with relaxed accuracy and temperature drift requirements. It cannot serve as a direct substitute for the original part in high-performance designs.
2. TL1431CLPRE3 Substitution Conclusion
This device can be considered a viable substitute, but temperature characteristics require verification. The TL1431CLPRE3 (TI) matches the original part's initial accuracy (±0.4%) exactly and is compatible in voltage range, adjustment method, and package, satisfying basic performance alignment. However, its datasheet does not specify a typical temperature coefficient, introducing uncertainty regarding its actual drift performance in application. If its temperature drift is significantly higher than the original's 20ppm/°C, additional deviation may occur under high or low temperature conditions. It is advisable to confirm the temperature drift parameter through bench testing or by consulting the manufacturer before substitution. If the results are acceptable, direct replacement is feasible, particularly in circuits with stringent initial accuracy requirements but limited operating temperature ranges.
Analysis ID: 4887-AAA6000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com