Original Part
Alternative Part
1. Substitution Conclusion for BU7266FVM-TR
The BU7266FVM-TR is not a suitable direct replacement for the AZV358MMTR-G1. The fundamental issue lies in its severely insufficient bandwidth and speed: it offers a gain-bandwidth product of only 4 kHz (compared to 1 MHz for the original part) and a slew rate of just 0.0024 V/µs (versus 1 V/µs for the original). This device can only process very low-frequency or near-DC signals. In applications for which the original part is intended—such as audio or sensor conditioning involving dynamic signals—the BU7266FVM-TR would introduce severe signal distortion or fail to respond entirely. Although it features ultra-low power consumption (700 nA) and ultra-low input bias current (1 pA), these advantages cannot compensate for the several orders of magnitude deficit in speed performance. Therefore, the substitution is not viable.
2. Substitution Conclusion for BU7486FVM-TR
The BU7486FVM-TR can functionally replace the AZV358MMTR-G1 from a performance standpoint; however, careful evaluation of system compatibility regarding power consumption and output drive capability is required. Its primary advantages are higher bandwidth and speed (gain-bandwidth product of 10 MHz and slew rate of 10 V/µs, both approximately 10 times that of the original part) as well as superior input characteristics (input bias current of 1 pA, offset voltage of 1 mV). These attributes enable it to handle high-frequency and fast transient signals more effectively. The key differences are its quiescent current of 6 mA (compared to 0.21 mA for the original), representing a roughly 30-fold increase in power dissipation—a significant burden for battery-powered systems—and its output current capability of 12 mA (versus 60 mA for the original), which provides weaker drive for heavy loads. In non-battery-powered applications with light loads where higher speed performance is needed, the BU7486FVM-TR is a feasible upgrade alternative.
Analysis ID: DA5A-6388000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com