Original Part
Alternative Part
Shunt Voltage Reference IC Adjustable 2.5V 36 VV ±0.5% 100 mA SOT-23-3
1. TL431FDT,215 Substitution Conclusion
This part can serve as a conditional substitute in specific applications. The key differences lie in its accuracy (±2%), which is notably lower than that of the original part (±0.5%), and the absence of a specified temperature coefficient (Tempoo) parameter. In applications requiring high‑precision and stable temperature performance for voltage reference, its performance may fall short. Its primary advantage is AEC‑Q100 automotive qualification, indicating that its design, manufacturing, and testing standards are better suited for demanding automotive or industrial environments where reliability is critical. Substitution may be acceptable if the original application has relaxed voltage accuracy requirements (e.g., non‑precision shutdown protection) and demands higher device reliability; otherwise, for precision reference applications, substitution is not recommended.
2. AS431IANTR‑G1 Substitution Conclusion
This device is a close substitute, but key details require evaluation. Two differences are noted: first, the reference voltage (2.5V) deviates slightly by 5mV from the original part (2.495V). In most feedback systems, this offset can be adjusted or absorbed, but the sensitivity of downstream circuitry to this minor deviation should be verified. Second, the typical cathode operating current is only 50µA, significantly lower than the original part’s 1mA. While this enables operation at very low power, benefiting energy‑saving designs, it may also affect dynamic response speed and load‑driving capability. If the application does not demand tight absolute reference voltage or fast dynamic response, and prioritizes lower quiescent current, this part can substitute well. If the circuit design relies on specific startup current or rapid response, careful verification is advised.
Analysis ID: D6C5-04B2000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com