Original Part
Alternative Part
1. LM258DMR2G Substitution Conclusion
The LM258DMR2G is a viable direct substitute for the AS358MMTR-G1 with a high degree of feasibility. Both are general-purpose standard dual operational amplifiers with highly similar core specifications: identical 2mV input offset voltage, 40mA output drive capability, 3V minimum operating voltage, and compatible 8-MSOP packages. The key differences are as follows: the LM258's maximum supply voltage is 32V, slightly lower than the AS358's 36V, making direct substitution impossible in designs operating near or above 32V. Furthermore, its input bias current (45nA vs. 20nA) and quiescent current per channel (800µA vs. 700µA) are marginally higher. This may have a minor impact in applications critically dependent on ultra-low input current or extreme power sensitivity (e.g., high-impedance sensor front-ends, battery-powered devices). However, for the vast majority of general-purpose circuits, these parameter differences fall within acceptable limits.
2. RC4558DGKRG4 Substitution Conclusion
The RC4558DGKRG4 is not suitable as a direct substitute for the AS358MMTR-G1, as they represent operational amplifiers with different performance orientations. Although both are dual op-amps, their key parameters differ significantly. First, the RC4558 operates over a much narrower voltage range (10-30V vs. 3-36V), rendering it unusable in low-voltage systems such as single-supply 5V or 3.3V rails. Second, its quiescent current consumption is substantially higher (2.5mA per channel vs. 700µA), leading to a major increase in power dissipation. Third, its output drive capability is weaker (10mA vs. 40mA), preventing it from driving the same loads. While the RC4558 offers superior AC performance (1.7V/µs slew rate, 3MHz gain-bandwidth product) and DC precision (500µV offset voltage), these advantages do not compensate for the fundamental incompatibilities in operating voltage, power consumption, and output capability. A direct substitution would cause many circuits to malfunction.
Analysis ID: 89D5-3B47000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com