Original Part
General Purpose Digital Isolator 2500Vrms 1 Channel 150Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Alternative Part
General Purpose Digital Isolator 2500Vrms 1 Channel 100Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
General Purpose Digital Isolator 2500Vrms 1 Channel 150Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
1. ISO721DRG4 Substitution Conclusion
Direct substitution is not recommended. The differences lie in the data rate (100 Mbps vs. 150 Mbps) and propagation delay (max 24 ns vs. 13 ns), which are significantly lower than the original part. In high-speed communication applications, these differences will fail to meet the original signal bandwidth and timing requirements, potentially leading to data errors or system timing violations. Although its pulse width distortion and rise/fall times are superior, and the package is compatible, the degradation in these core performance parameters limits its use to applications insensitive to speed and delay. Therefore, it cannot serve as a full-performance substitute.
2. ISO722MDRG4 Substitution Conclusion
Substitution is conditionally recommended, with a critical need to evaluate the power supply voltage and noise immunity requirements. Its key performance parameter, data rate (150 Mbps), matches the original part. The propagation delay (max 16 ns), while slightly increased, remains within the same order of magnitude, allowing functional compatibility in most high-speed signal transmission scenarios. The primary differences are a narrower supply voltage range (3V to 5.5V vs. 2.5V to 5.5V) and a lower Common-Mode Transient Immunity (CMTI) rating (25 kV/µs vs. 35 kV/µs). This makes it incompatible if the original design utilizes a supply rail between 2.5V and 3V. Furthermore, in environments with significant noise interference (e.g., motor drives), its noise immunity may be insufficient. This part can be considered a viable alternative only after confirming that the supply voltage is ≥3V and the application's noise environment is within acceptable limits.
Analysis ID: 1C03-05E3000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com