Original Part
Alternative Part
Voltage Feedback Amplifier 2 Circuit Rail-to-Rail 8-SOIC
1. ISL28291FBZ-T7 Substitution Conclusion
The ISL28291FBZ-T7 significantly outperforms the BU7486F-E2 in bandwidth (61 MHz vs. 10 MHz), slew rate (17 V/µs vs. 10 V/µs), and output current (130 mA vs. 12 mA), making it superior for high-speed signal processing and high-load drive applications. However, its input bias current is substantially higher (3 µA vs. 1 pA), which can introduce significant error in high-input-impedance precision circuits, such as sensor amplifiers, compromising signal integrity. Furthermore, the different package widths (3.90 mm vs. 4.40 mm) may require PCB layout adjustments. Substitution with the ISL28291FBZ-T7 is viable for applications not reliant on ultra-low input bias current—such as general-purpose amplification or drive scenarios—where higher speed and drive capability are needed. It is not recommended for precision measurement applications.
2. MAX4474ESA+ Substitution Conclusion
The MAX4474ESA+ is far inferior to the BU7486F-E2 in bandwidth (40 kHz vs. 10 MHz) and slew rate (0.02 V/µs vs. 10 V/µs), rendering it unsuitable for high-speed or wideband signal processing (e.g., audio or video amplification) where performance would be severely limited. Its advantages lie in an extremely low quiescent current (1.5 µA vs. 6 mA) and a wider supply voltage range (1.8V–5.5V vs. 3V–5.5V), which are beneficial for low-power, low-frequency applications like battery-powered slow-sensing systems. Additionally, it offers lower input offset voltage (500 µV vs. 1 mV) and better DC accuracy. The MAX4474ESA+ is not a suitable substitute for the BU7486F-E2 unless the application has minimal speed requirements and prioritizes power consumption above all else.
Analysis ID: F0B1-DDF4000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com