Original Part
Alternative Part
1. ISL28214FBZ-T7 Substitution Conclusion
For most general-purpose low-power applications, the ISL28214FBZ-T7 can serve as a viable functional substitute for the BU7486F-E2, albeit with notable performance trade-offs. The key differences are as follows: the ISL28214FBZ-T7 offers half the gain-bandwidth product (5 MHz) and slew rate (2.5 V/µs) of the original part, which will result in inferior performance in applications involving high-frequency signals or requiring fast transient response. However, its lower input offset voltage (500 µV) contributes to improved DC accuracy, and its extremely low quiescent current (300 µA per channel) significantly reduces power consumption. Additionally, it provides stronger output drive capability (31 mA). A potential mechanical constraint is the difference in package body width (3.90 mm vs. 4.40 mm), which may lead to PCB layout incompatibility.
2. LMX358IDT Substitution Conclusion
The LMX358IDT is a less feasible direct substitute for the BU7486F-E2, primarily due to orders-of-magnitude gaps in key dynamic performance parameters that may fail to meet the original design's speed requirements. Its gain-bandwidth product (1.3 MHz) and slew rate (0.7 V/µs) are substantially lower than those of the original part (10 MHz, 10 V/µs), limiting its suitability to low-speed signal processing scenarios with minimal bandwidth demands. Furthermore, its input bias current (27 nA) is tens of thousands of times higher, and its input offset voltage (4 mV) is also greater. These characteristics will introduce significant errors in applications with high-impedance sources or those requiring high-precision DC amplification. Although the LMX358IDT offers lower power consumption (130 µA per channel) and higher output current capability (70 mA), the fundamental shortcomings in speed and precision are the primary barriers to substitution. The package width (3.90 mm) similarly presents a compatibility issue.
Analysis ID: FC1B-13B4000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com