Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)
1. 2305-1DCG8 Substitution Conclusion
Substitution is feasible, but input level compatibility must be considered. Compared to the original part, the 2305-1DCG8 differs by featuring LVTTL inputs, while its outputs are compatible with CMOS, LVCMOS, and TTL standards; the original part was a pure TTL interface device. Additionally, the 2305-1DCG8 incorporates a PLL bypass mode. Under a 3.3V supply, LVTTL input thresholds are generally compatible with TTL levels, allowing for direct replacement in most cases. However, if the input signal's high-level voltage is near the threshold (e.g., around 2.4V), verification against the LVTTL VIH specification is recommended. The broader output compatibility is an advantage. The PLL bypass function is an additional feature and does not affect normal operation in zero-delay buffer mode.
2. 2305A-1DCG8 Substitution Conclusion
Substitution is feasible, with the same considerations as for the 2305-1DCG8. The 2305A-1DCG8 parameters are identical to those of the 2305-1DCG8. Its differences from the original part are likewise the LVTTL inputs, multi-standard outputs, and PLL bypass capability. Typically, an "A" suffix may denote a minor revision or different production lot of the same base part, but core electrical parameters and the interface remain identical. Its substitution feasibility is equivalent to that of the 2305-1DCG8, requiring the same attention to input level compatibility validation in application.
Analysis ID: 4971-A80F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com