Original Part
Alternative Part
1. HA5023IBZ96 Substitution Conclusion
Direct substitution is not recommended. Although its supply voltage range (±4.75V–18V) is compatible with the original part and its bandwidth (125 MHz) is similar, two critical performance limitations exist: first, the slew rate (350 V/µs) is significantly lower than that of the THS3112IDDAR (1550 V/µs). This results in insufficient response speed for high‑speed large‑signal applications, potentially causing waveform distortion. Second, the output drive capability (20 mA) is only about 7% of the original part’s (270 mA), making it completely unsuitable for driving low‑impedance loads such as video cables or high‑speed ADCs, severely restricting its applicability. This substitute is only suitable for applications with minimal speed and drive‑current requirements.
2. THS3092DDAR Substitution Conclusion
Feasible, and a high‑performance alternative. It surpasses the original part in all key dynamic performance parameters: slew rate (5700 V/µs) is 3.7 times higher, and the –3 dB bandwidth (160 MHz) is also greater, enabling it to handle higher‑speed signals with faster transient response. Meanwhile, its output current (280 mA) and supply voltage range (10V–30V) match the original part exactly, ensuring equivalent load‑driving capability and power supply compatibility. The main differences are a higher quiescent current (9.5 mA), which increases power dissipation, and a higher input bias current (4 µA) compared to the original (330 nA); this may require reevaluation of error when driving high‑impedance sources. Overall, the THS3092DDAR is an ideal upgrade replacement when higher speed is required.
Analysis ID: 4C0B-E0EB000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com